Proper Ways To Clean Or Replace Air Conditioning Hoses

Spread the love

During a hot summer day, you would want to turn the AC on and on full power. It is one of the things that you must have in your car, especially when you’re traveling in hot places where the temperature can spike into unbearable heights. However, there are times when the AC’s blowing warm air instead of the cold and comforting one you’re expecting. In this kind of situation, the part that most likely failed to work properly is the Air Conditioning hoses.

What Are Car Air Conditioning Hoses?

Car air conditioning hoses are one of the main components of your car AC system. This place is where the refrigerants contained. When the AC system is not as cold as it used to be, or if the AC is blowing warm air, there is a chance that these hoses are not functioning properly. This is because when the hoses are not in the good condition, the refrigerant will leak and can damage other parts of the AC.

Symptoms Of Failing Car AC Hose

The first and the most obvious sign is if there are irregularities in the temperature that your AC is producing. An example of irregularity is when your AC isn’t blowing air as cold as before. Another example is when your AC produced cold air, but will then produce warm air later on. Perhaps, the nastiest part is when there’s an unusual noise coming from your AC. This can be brought from the possible leaking of refrigerant that already affected other components of the AC.

Another way to check your fittings is by checking for physical damage. You need to check your AC system for noticeable physical damages that might’ve caused the rubber seals and hoses to lose elasticity. Most of the time, a damaged hose causes leaking and needs to be replaced immediately.

Proper Way To Replace Car AC Hoses

Replacing car air conditioning hoses seems like an easy task, but US Environmental Protection Agency or EPA requires individuals to have at least a section 608 license. This is also called the universal refrigerant handler’s license. The reason for this is because replacing these parts requires a specialized set of tools. There’s a lot of professionals who are offering any air conditioning hoses tacoma wa services. If you know someone, you can ask them to do the job instead. However, if you have the tools and know how to use them, the first thing you need to do is to recover the old refrigerant.

Hook the AC recovery machine’s cords to places: blue line for low side port, a red line for high side port, and yellow line for the recovery tank. Follow the instruction in the AC recovery machine. Turn on the AC machine and make sure that the readings in high and low are both zero.

The next step is to get a basic socket set, line O-ring, eye protection, and the replacement of the AC hose. Wear your eye protection and first, locate the failing AC hose, replace the O-ring, and install the new line. After installation, you need to vacuum, recharge, and check your AC system.


Leave a Reply

Your email address will not be published. Required fields are marked *