Plumbing Tips That Every Homeowner Can Use

Young plumber fixing a sink in bathroom

If you are a first time homeowner or maybe someone who has just moved out of Mom and Dad’s humble abode, you may not know a lick about plumbing, but there are certain things that you should know. This article will discuss some of them, and you will be more knowledgeable after reading the tips below.

Before starting any plumbing project be sure to turn off the main water supply. Water damage can be one of the most expensive things to repair. To minimize damage turn the main water supply off as well as any shut off valves near where you are working. This will save a great deal of hardship later on.

To avoid clogs, pay attention to what you flush. Sanitary napkins, thick toilet paper and baby wipes should never be flushed. These items can expand and cause a clog, or get caught on a pipe. Instead, dispose of them in a sanitary way that does not involve flushing them down the toilet.

To prevent the pipes from freezing, it is advisable to seal off air vents, cracks and access doors. In order to keep the heat in and the cold out, you can try using insulation or caulk. In the event a leak occurs, make it a point to remind everyone where the master circuit breaker is so it can be shut off immediately.

Unclog drains with ease. Try using a plunger and drain cleaner, as your clog may simply be a build-up of hair and debris. If this doesn’t work you may have to clear the drain with a snake. Feed the snake into the drain line as far as it will go. Turn the crank gently, which will help to loosen the clog. Remove the snake, and run water down the drain to see if the clog has been removed. You may have to use the snake a couple of times, before the clog is cleared so don’t give up!

You can unclog a toilet by pouring warm water in the bowl from waist level. Once the water level gets low again, repeat the process.

Keep your bathtub drain running well by pouring a cup of baking soda followed by a cup of vinegar down the drain each month. This will cause the vigorous bubbling you may remember from the “volcano” in a grade school science project, so be sure to close the drain with a stopper. After waiting a few minutes, flush the drain with boiling water. Although this is useful for clearing away simple clogs made of hair and soap debris, it will not work for serious blockages.

Putting in shower heads that are energy-efficient can save you a lot of money in energy costs. Showers and baths are responsible for the bulk of your hot water usage. Investing just a few bucks in these newer shower heads can yield triple digit annual savings.

Now that you have read these plumbing tips, you should feel a little more comfortable about looking after that scary hardware that lurks in some rooms of your home. Follow the advice above and you are sure to do the right things when tinkering around with any of the pipes. For more information on click here: http://www.onlineservicecentre.com

Leave a Reply

Your email address will not be published. Required fields are marked *